OB430CEK5-2K 43 Inch Open frame touch monitor, outdoor display, high brightness 2000nits

43 Inch Outdoor Touch Monitor OB430CEK5-2K

1. Outdoor Use

2. PCAP touch, 10points

3. FHD 1920*1080

4. Brightness: 2000nits

5. Auto Light sensor

6. Cooling Fan System

7. Surface IP65 water-proof

Model Number OB430CEK5-2K
Total parameter Diagonal Size 43.0 inch LCM a-Si TFT-LCD
Aspect Ratio 16:9
Enclosure Color Black
Video Port VGA/DVI/HDMI (Optional DP)
Light Sensor Automatic Light Sensor
Monitor Dimension 995.3x583.5x99.8mm
VESA Dimension 400x400mm
Cooling Fans System Work Princical PWM Control
Number of Fans Accroding to Drawing
Working Modes Start-Up And Full-Speed Temperatures Can Be Set Freely
Supporting Two Working Modes: Minimum Speed And Fan Shutdown
LCD Panel Active Area(mm) 942(W)×530(H) mm
Resolution 1920(RGB)×1080 , FHD
Dot Pitch(mm) 0.210×0.630 (H×V)
Viewing angle(Typ.)(CR≥10) 89/89/89/89 (Min.)(CR≥10)
Contrast  (Typ.) (TM)   1100:1 (Typ.) (TM)
Brightness (typical) 2000 cd/m²
Response Time (Typ.)(Tr/Td) 12 (Typ.)(G to G)
Support Color 16.7M
Backlight MTBF(hr) LED Backlight Min 50K hours
Touchscreen Touch Technology PCAP Touch, Capacitive Touch Screen
Input Methods Fingers
Gloved hand
Passive stylus
Number of Touches Single - Touch and 10 Multi Touch
Glass Thickness 4mm Tempered Glass
Glass Cover Treatment Anti Glare Treatment + Anti Reflective with Anti UV Film
Light Transmission 90%
Response Time 8 ms
Life Span Over 50 million touches in one location
Positional Accuracy ± 1.5mm
Touch interface USB
RS232(Optional)
Operating System Windows XP
Windows 7
Windows 8
Linux
Android
Power Power Consumption (W) 175W
Input Voltage 100-240 VAC, 50-60 Hz
MTBF 50000 hr at 25°C
Environment Operating Temp. -20~60°C
Storage Temp. -20~70°C
Operating RH: 20%~80%
Storage RH: 10%~90%
Accessories Included 1 x Power Cable,1 x USB Cable, 1 x HDMI Cable, Rear Mount brackets
Optional Wall Mount, Floor Stand/Trolley, Ceiling Mount, Table Stand
Warranty Warranty Period 1 Year Free Warranty
Technical Support Lifetime
     
Fans Working Princical    
After the power supply is normal, the POW light on the motherboard will light up. At this time, the speed controller begins to detect the current temperature and adjust the temperature according to the current settings.
To adjust the fan speed within the temperature range, take the factory default temperature range of the speed regulator as an example.
The range is L=30℃~H=50℃. When the current temperature is detected to be greater than or equal to 30℃, the speed controller adjusts the fan speed in a linear proportion.
When the temperature rises, the fan speed will also increase. When the temperature is ≥50℃, the fan will turn to full speed. When the temperature drops to ≤27℃(L-3), the speed controller keeps the fan at minimum speed/or turns off the fan.

Drawing download


Related Products